Series solenoid for explosion-isolation valve

Attention:

   1.The manual push rod at the end may be used during hydraulic system testing,with automatic reset functions. 

   2.For installation, use screws with a tensile strength of greater than 85 kg/mm2 (Available at the time of purchase).

   3.Inlet O-Ring must fully comply with Gb1325-76 Standards.

   4.Remove the cover, tighten it again after wiring to the base. There is a rubber ring at the cover wire entrance, when the threaded cover is tightened, wiring in the plug will be tightly clamped.

   5.Cable must comply with explosion-proof requirements

Technical specification

Model description 

3.Packaging & Shipping

• Inner packing: opp bag, then carton box for each product

• Outer packing: export standard carton, Foam outside protecting the goods against damage

• Usually we ship your order by sea or by air...

• We do our best to ship your order within 1 week after receiving your payment

• We'll tell you the tracking number once your order has been sent

• We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal






4.About us

1: Various style for each products and completely series pneumatic products for you to choose from.
2: Large stock for fast shipping.
3: High quality with competitive price
4: Sample order & small quantity order is ok

5:Customize according to your special demand.
6: Provide free products information.
7. Reliable quality assured and active after-sell service

Feel free to contact us at anytime if you have any problems or questions on your purchase. 

We will resolve any problems such as damaged, not as described, missing parts, and lost items. 

All emails will be replied within 24 hours except Saturday. & Sunday and Chinese holidays. 

If you have any other requirements or questions, welcome to visit our website, or just contact 

with us directly. Thank you!